How to use the Compass on iPhone


How do I use the Compass app on iPhone? It’s as simple as holding your phone and staring at it while you walk (like you usually do!).

Your iPhone has built-in GPS, which can come in extremely handy if you find yourself lost and without a cellular signal. You might not even have known that the Compass app was there on your iPhone all along, so you may not have taken the time to familiarize yourself with it.

Let us give you a helping hand!

  • How to set up and calibrate the Compass app on iPhone
  • How to use the Compass on iPhone
  • How to switch to true north in the Compass app for iPhone
  • How to use the level in the Compass app on iPhone

How to set up and calibrate the Compass app on iPhone

  1. Launch Compass from your Home screen.
  2. Hold your iPhone flat in your palm and follow the on-screen instructions when prompted to calibrate. You’ll have to tilt your iPhone to roll the ball around the on-screen circle.

After you get the ball all the way around the circle, the compass will be calibrated and you’ll be able to start using it right away!

How to use the Compass on iPhone

The Compass app on iPhone isn’t as accurate as the real thing, but it’ll help you follow basic directions and bearings in a pinch.

  1. Launch the Compass app from your Home screen.
  2. Hold your iPhone flat in the palm of your hand.
  3. Spin around, holding your iPhone in your hand until you hit the bearing (degrees) you want to follow. For example, 30 degrees north-northeast.
  4. Tap the compass face once to lock in that bearing.

Now when you stray from that path, you’ll see the beginnings of a red circle inside the compass. Spin around so that your white pointer is pointed back on the bearing of your choice.

How to switch to true north in the Compass app for iPhone

You can choose to use true north or magnetic north when navigating with your iPhone. Here’s how to turn on true north:

  1. Launch Settings from your Home screen.
  2. Tap Compass.
  3. Tap the switch next to Use True North.

How to use the level in the Compass app on iPhone

The level in the Compass app on your iPhone is a bit of a doozy to work with, especially if you’re fighting off a hoard of zombies whilst trying to build a barricade to keep them out. And that barricade has to be perfectly level.

  1. Launch the Compass app from your Home screen.
  2. Swipe left on the compass face. If you’re holding your iPhone flat in your palm, you should see white bubbles around a number in black, the horizontal level. If you tilt your phone so that the screen is parallel to your face, you’ll get the vertical level.

Horizontal level

  1. Place your iPhone flat on the surface of the object you’re trying to level off.
  2. Tilt your iPhone in all directions until you hit 0 degrees and the screen turns green.
  3. You can tap once to turn the black screen red, and it will stay that way until your iPhone is level, at which point it’ll turn green.

Vertical level

  1. Hold your iPhone against the object that you’re trying to vertically level.
  2. Tilt your iPhone in all directions until your hit 0 degrees and the bottom half of the screen turns green.
  3. If you want to then take another measurement off of that angle, tap the level once. You’ll then see red as you stray away from the angle you were on. This can help you measure 90-degree and 45-degree angles.

Questions?

Let me know in the comments below!


Thank you have visited this post How to use the Compass on iPhone. We wish could be additional information about technology for you

Source link